US $66.29Original Price : US $129.99 (49%)
Cheap Offer DOKIO Brand 60W 18 Volt Black Solar Panel China + 10A 12/24 Volt Controller 60 Watt Panels Solar Ce with Free Worldwide Shipping!
4.75
Related Products :
DOKIO 80W 18 Volt Black Solar Panel China + 10A 12/24 Volt Controller 80 Watt Panels Solar Cell/Module/System/Home/Boat
DOKIO 18V 40W Polycrystalline Solar Panel 460*660*25mm Silicon Power Painel Top Quality Solar Battery china Solar Fotovoltaico
DOKIO Brand Solar Panel China 20W Blue Solar Panels + 10A 12V/24V Controller With USB Interface Battery Travel Power Supply
Dokio 50W Polycrystalline Silicon Solar Panel China 18V 530x660x25MM Size Panel Solar Paneles solares China #DSP-50P
Product description
[32801305074]DOKIOBasic characteristics of the product
Length
660mm
Weight
4.60 kg
Width
625 mm
Mainmaterial
Monocrystalline
Height
25 mm
Framematerial
Aluminum
NOTE: PWM Controller 12V/10A.
DOKIO Electrical characteristics
ERFORMANCE UNDER STANDARD TEST CONDITIONS(STC*)
Maximumpower
Pmax
60 Wp
Opencircuitvoltage
Voc
22.50 V
Maximumpowerpointvoltage
Vmpp
18.00 V
Short-circuitcurrent
Isc
3.58 A
Maximumpowerpointcurrent
Impp
3.33 A
PERFORMANCE AT 1000 W/ M⊃2;, NOCT, AM 1.5
Minor reduction in efficiency under partial load conditions at 25°C: at 100W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved.
COMPONENT MATERI
Cellspermodule
36
Celldimensions
156mmx62mm
Celltype
MonocrystallineSilicon
Front
temperedglass(EN12150)
SYSTEM INTEGRATION PARAMETERS
MaximumsystemvoltageSCII
1000V
Maximumreversecurrent
16A
MaximumsystemvoltageUSANEC
600V
Increasedsnowloadacc.toIEC61215
5.4kN/m⊃2;
THERMAL CHARACTERISTICS
NOCT
47°C
TCVoc
-0.33%/°C
TCIsc
0.042%/°C
TCPmpp
-0.45%/°C
ADDITIONAL DATA
PTCrating
90W
Moduleefficiency
17.0%
Junctionbox
IP65
DOKIOPlus-Sorting*
Pflash≥Pmax
Connector
MC4
Powertolerance*
+/-3%
DOKIO Product Show
How to test solar panels?
Please use a multimeter to directly test the solar panels and test them around 11:00 to 1:00 noon. At 12 noon, please test the solar panels directly on the floor.
Please ensure that there are no obstructions or shadows on the surface of the solar panel during testing.
?
Build your own solar system
Operating Instruction for Solar Panel
Installation and operation of solar cell module
a). Climatic Conditions
Install PV module according to the following conditions
Ambient Temperature: -20? to + 40?.
Operating Temperature: -20? to + 80?.
Borne Snow Pressure: less than 2000Pa
Borne Wind Pressure: less than 3000Pa
Water proof: don’t soak the PV module in water or continuously expose it to the sprinkling device or under fountains.
Corrosion resistance: except for corrosive salt area and sulfurous area.
b). Direction
Module shall be installed facing south (northern hemisphere) or north (southern hemisphere).Facing east or west may send only a relatively small amount of electric energy, and incorrect installing orientation will cause a loss in energy output.
Series-connected PV module shall be installed in the same direction and with the same angle, because different directions and angles may cause loss of energy due to the differences of solar radiation.
Installation of module shall avoid under shadows. Even though the module decreases loss of energy through bypass diode, the shadow will cause loss in energy output.
Under normal circumstances, the module generates more current and voltage in routines than in the standardized testing conditions, therefore, please operate the configuration by multiplying 1.25 times of the short-circuit current and open-circuit voltage during the installation and application.
c). Installation and Precautions
The module must be installed on the roof with fire proof function.
Connector for installation and connection needs to obtain the approved certification of connector (VDE V 0126-3).
Junction box with the type required by the installation and connection needs to obtain the approved certification of junction box (2 PFG1162).
Cables with the type required by the installation and connection need to obtain the approved certification of cables (2 PFG1161).
When installing modules in batches, the interval distance between modules shall be larger than 100mm.
Firstly, place the solar cell module with certain angle (generally 30° or 45°in horizontal plane), and choose a direction that can let the sunlight directly radiate the solar cell module for more time to place the module.
Module and bracket shall be fully contacted with the ground.
When installing modules, keep away from ignition source or fuels.
Installation structure and bracket must bear external pressures such as wind pressure and snow pressure.
Installation structure shall be environment resistant and chosen appropriate materials and preservative treatment.
Method for high altitude installation shall be appropriate.
High falling may cause death, disability and damages.
It is forbidden to disassemble, bend, toss the module, nor shock it by hard objects or walk on it.
d). Wire Connection and Precautions
Open the junction box, connect the red wire to the positive pole (+) and the black wire to the negative pole (-) and insert the other end to the interface of the solar cell wire of the battery cabinet.
Fasten the module on the bracket by fastening piece and module mounting hole, the hardness and intensity of the fastening piece and module bracket must achieve the standard and be in accordance with relevant requirements.
Use the private joint provided by the company.
Note: short-circuit for positive and negative poles are forbidden.
The joint shall be tightened without any clearances; otherwise, the clearances may cause sparks.
Check if the fastening part of the installation structure is loosen; otherwise, it must be tightened.
Often clear the dust and dirt on the surface of the PV module with soft cloth to prevent the loss in energy output due to the block on the surface of the module. Check frequently if the surface of the module is blocked by objects.
Replace modules with the same specifications and the same type products.
Be careful not to contact the exposed part of the wire or joint, and if it is necessary, wear the insulator (such as tools, gloves, etc.).
During the process of installation and maintenance, be sure to cover the surface of the module with cloth or other light proof materials, because the module will generate high voltage under solar radiation which would be dangerous.
Through the highest standards of European testing
Our strength guarantees quality and quantity
Precision Machining
Strict and testing
Warehouse
Sales Show
Posting Komentar
Posting Komentar